Description technique 

Frame:

Professionally welded steel structure, composed of hollow and rolled profiles (3 mm thick S235), self-supporting, primed and painted on a polyurethane base in RAL 7016, or according to customer requirements; Container corners of 8 pieces.

Soil structure:

Blind floor:  0.5 mm T14 trapezoidal sheet metal, riveted to the floor joists

Insulation:  100 mm mineral wool, 0.2 mm vapor barrier

Base plate:  OSB panels, screwed onto profiled steel beams

Flooring:  2 mm PVC with skirting board, glued over the entire surface, marbled grey colour pattern.

Charge au sol admissible : 3,8 kn/m

Wall structure:

Profiled sheet metal:  0.5 mm T8 trapezoidal sheet metal in RAL 7016 (anthracite) – other colors available according to customer wishes at an additional cost.

Insulation:  50 mm mineral wool, up to 100 mm depending on customer requirements

Interior lining:  16 mm laminated panel, white.

Vapor barrier:  0.2 mm – membrane

Roof structure:

Profiled sheet metal:  Trapezoidal sheet metal 0.7 mm T35

Insulation:  100 mm mineral wool

Interior lining:  16 mm laminated panel, white.

Vapor barrier:  0.2 mm – membrane

Water drainage:  water is drained through PVC pipes in the corners of the container

Window:

1 piece of plastic window 2m x 1.2m with insulated glazing, tilt-and-turn hardware and plastic roller shutters

Door:

Exterior door: Hörmann ZKI60 single-leaf door, RAL7016

Dimensions 900 x 1 970 mm,

Bathroom:   hot water boiler, toilet, shower and sink

Electrical installation: VDE standard. Electrical Standard

CEE 380V/32A/5-pin outdoor sockets. Lighting – 2 x 50W LED lamps, controlled by an on/off switch, sockets, a control box with the appropriate number of fuses and IF circuit breakers.

The electrical installation is recessed.

We can install additional windows in a short time.

We can also produce them at any time according to your specifications in other dimensions and colours or with toilets or other facilities.